Hydraulic Motors

High-Pressure Ratings

Higher pressure ratings for applications requiring higher torque.

The ParkerĀ® line of Low Speed High Torque motors provides power and versatility at an affordable cost. From available small, medium and large frame models, we have you covered for most hydraulic motor application requirements. We are a stocking dealer and can further modify and assemble any configuration to meet your needs. These motors feature exceptional side load capacity, high-pressure shaft seal and smooth low-speed operation.
Small Frame TB Series
Frames
Low Speed High Torque Motors (LSHT) | Parker

High pressure shaft seal, external drains not required, roller vane technology for automatic wear compensation, and full flow internal cooling and flushing.

  • 14 displacements: 2.5 – 24.0 in3/rev. Max Speed 785 RPM. Max side load to 1100 lbs.
  • Max Continuous pressure 1800 psi (125 bar). Max Intermittent Pressure 2400 psi (165 bar)
  • Max flow up to 15 gpm
  • max cont. Torque 3897 lb in / max inter. Torque 4783 lb in.
Small Frame TE Series
Frames
Low Speed High Torque Motors (LSHT) | Parker

High pressure shaft seals, Robust roller bearings, high flow shaft seal cooling. Tolerates higher side loads, suitable for chain and sprocket shaft connections

  • 14 displacements: 2.5 – 24.0 in3/rev. Max Speed 1000 RPM. Max side load to 1500 lbs.
  • Max Continuous pressure 2030 psi (140 bar). Max Intermittent Pressure 2750 psi (190 bar)
  • max flow up to 20 gpm
  • max cont. Torque 4139 lb in / max inter. Torque 5728 lb in.
Large Frame TF Series
Frames
Low Speed High Torque Motors (LSHT) | Parker

Patented 60:40 spline geometery for strength. Roller Vanes and sealed Commutation to assure high volumetric efficiency, smooth low speed operation, and extended life.

  • 11 displacements: 4.9 – 29.1 in3/rev. Max Speed 749 RPM. Max side load to 3597 lbs.
  • Max Continuous pressure 3000 psi (210 bar). Max Intermittent Pressure 4000 psi (280 bar)
  • Max flow up to 25 gpm
  • max cont. Torque 6027 lb in / max inter. Torque 8106 lb in.
Large Frame TG Series
Frames
Low Speed High Torque Motors (LSHT) | Parker

Superior side load capacity. Patented 60:40 spline geometery. Rugged construction throughout. Long life powertrain.

  • 12 displacements: 8.6 – 58.5 in3/rev. Max Speed 660 RPM. Max side load to 3597 lbs.
  • Max Continuous pressure 3000 psi (210 bar). Max Intermittent Pressure 4000 psi (280 bar)
  • Max Flow up to 30 gpm
  • max cont. Torque 9239 lb in / max inter. Torque 12636 lb in.
Medium Duty BG/BH
Medium Duty BG/BH
Brake Motors | Parker

A rugged, durable, spring-applied, hydraulically released parking brake. Ideal for medium duty applications requiring a parking or holding brake.

  • 13 displacements: 8.6 – 58.5 in3/rev. Max Speed 660 RPM Max side load to 4800 lbs.
  • Max Continuous pressure 3000 psi (210 bar). Max Intermittent Pressure 4000 psi (280 bar)
  • max flow up to 30 gpm
  • max cont. Torque 9239 lb in / max inter. Torque 12636 lb in.
Medium Duty 110A
Medium Duty 110A
Thru-Shaft Motors | Parker

Compact, high perfomrance motor. One piece shaft, reduced internal spline stress, increased motor life, and the ability to withstand rapid reversals.

  • 9 displacements: 3.6 – 24.1 in3/rev. Max Speed 858 RPM Max side load to 1450 lbs.
  • Max Continuous pressure 2500 psi (170 bar). Max Intermittent Pressure 3000 psi (210 bar)
  • max flow up to 30 gpm
  • max cont. Torque 5548 lb in / max inter. Torque 7247 lb in.
High Speed M2/M4
High Speed
High Speed Gerotor Motors | Parker

Versatile high speed motor, Bi-Directional operation, high starting torque, Heavy duty Bearings, High pressure shaft seal

  • Operating Speeds from 5 to 7500 rpm
  • Max Continuous pressure 2000 psi (170 bar). Max Intermittent Pressure 2400 psi (165 bar)
  • max flow up to 35 gpm
  • max cont. Torque 1000 lb in / max inter. Torque 1250 lb in.
F1 Series Motors
F1 Series
Bent Axis Motors | Parker

45 degree bent axis pump. Effiecient and straight forward with unsurpassed reliability

  • Speeds up to 2700 rpm
  • Max operating pressure 5800 psi (400 bar)
  • Output Flows up to 48 gpm
  • High self priming speeds for increased itemsivity. These pumps operate at optimum efficiency in the most demanding environments
F2 Series Motors
F2 Series
Bent Axis Motors | Parker
45 degree bent axis Twin-Flow pump. The first truck pump on the market to feature two entirely independent flows.
  • speeds up to 2100 rpm
  • Max operating pressure 5800 psi (400 bar)
  • Output flows up to 60 gpm
  • Features a Smart System Solution. Can provide three different flows at the same engine speed.
F11/F12 Series Motors
Bent Axis Motors | Parker
Fixed Displacement bent axis pump/motor used in both open and closed loop circuits.
  • speeds up to 4600 rpm (F11) & 3150 rpm (F12)
  • max operating pressure 6090 psi (420 bar) (F11) & 6960 psi (480 bar) (F12)
  • output flows up to 17 gpm (F11) & 95 gpm (F12)
  • High speeds, low noise. A straight-forward design with very few moving parts making them very reliable pumps/motors.
V12/V14 Series
V12/V13 Series
Bent Axis Motors | Parker
Variable Displacement Hydraulic Motors designed for both open and closed circuits
  • Speeds up to 7900 rpm (V12) & 6500 rpm (V14)
  • Max operating pressure 7000 psi (480 bar)
  • output flows up to 90 gpm (V12) & 145 gpm (V14)
  • ISO, SAE, and Cartridge versions available. Specifically designed for the most demanding mobile applications.
PGP020/031/051/051/076 Roller Bearing Series
PGP020 Gear Pumps
Gear Motors | Parker
Single and Multiple pump/motor, Flow Divider, Piggyback and Winch Motor configurations are available.
  • Speeds up to 2400 rpm.
  • Maximum Operating Pressure up to to 3000 psi (206 bar).
  • Output flows up to to 114 gpm 431 lpm).
  • Average PGM051 torque up to 2250 in-lbs @ 2500 psi (172 bar)
PGP315/330/350/365 Bushing Series
pgp-315-330-350-365
Gear Motors | Parker
Single, Multiple, Piggyback, and Thru-Drive assemblies. Heavy-Duty Application. Low Friction Design. Three-piece cast iron construction.
  • Speeds up to 3000 rpm
  • Maximum Operating Pressure up to 3500 psi (241 bar)
  • Displacements from .465 to 9.00cir
  • Volumetric Efficiencies to 98%
P505/P511 Aluminum Series
P505/P511 Series
Gear Motors | Parker
Single or Multiple Configurations. Superior Performance, high efficiency and low noise operation at high operating pressures.
  • Speeds up to 4000 rpm.
  • (P505) Maximum Operating Pressure up to 3988 psi (275 bar) / (P511)
  • Maximum Operating Pressure to 3625 psi (250 bar)
  • Output flows up to 37 gpm Volumetric Efficiencies to 98%
P16/P20/P25 Series
P16
Gear Motors | Parker
Standard, Tandem, Priority Valve, Clutch Pumps, and Combination w/ priority valve.
  • Speeds up to 3600 rpm
  • Maximum Operating Pressure to 3000 psi (207 bar)
  • Output Flows to 38 gpm per section
  • Cast iron pumping sections for durability
MGG Aluminum Series
HY09-PGG-MGG-US
Gear Motors | Parker
Fixed Clearance Design. Bi-directional. Roller Bearing Design. Lightweight Aluminum Construction.
  • Speeds up to 5000 rpm
  • Maximum Operating Pressure up to 2000 psi (138 bar)
  • Output flows up to 3.03 gpm @ 1000 rpm
Top

Quality Hydraulic Components

We have the products and knowledge to keep your equipment running smoothly. Whether you need new products or repairs, we’re your one-stop-shop.

(586) 788-1013 Let's Talk