|
SUPPLIER
& SERVICE CENTER FOR
HYDRAULIC COMPONENTS |
|
Chesterfield
Office
25340 Terra Industrial Dr
Chesterfield, MI 48051
Ph (586) 949-6860
Fax (586) 949-0370
Grand Rapids
Branch
3755 Linden S.E.
Grand Rapids, MI 49548
Ph (616) 241-4695
Fax (616) 241-4394
Call M-F
8am-5pm ET
Email Us
|
|
We
accept:
 |
|
|
|
|
| Am-Dyn-Ic
Fluid Power Inc is your premier supplier for
any type wetline kit. We can supply the complete
wet kit, or simply main components such as Power
Take-Off units, Pumps, Control Valves, Filters,
Reservoirs (tanks) and/or Hydraulic Hoses and
Fittings. Whatever fits your need, we are here to
help with expert advice, service and quality brand
components from these manufacturers: Parker,
Chelsea, Commercial Intertech, Gresen, Tyrone,
Morse, Buyers Products, etc.
|
|
|
|
|
|
| We
are a stocking distributor for the
manufacturers of the most popular wetline kit
components, so you can be assured of
availability, quality and competitive pricing.
We also supply repair parts and service what
we sell.
Contact us
today for more information!
 |
|
| Complete
Dump Trailer Wet Kits and components.
For systems requiring up to
2800psi and a control valve for single
acting cylinder (hoist) operation. 2
or 3 line operation. |
Complete
Utility Trailer Wet Kits and
components. For higher pressure/low
flow systems used for operation of Lowboy,
Walking Floor, Gooseneck & Car
Carrier trailers , which are equipped
with a directional control valve on
the trailer. |
|
|
|
Popular
all new
kits in stock and ready
for immediate shipment via UPS. |
|
|
Other options are available,
including kits for dual
pressure/multi trailer use systems. Various hydraulic
reservoirs, including upright,
saddle mount, and frame mount
types, available in steel,
aluminum and poly
manufacture. We can also assemble
a kit per your special requirements.
Side Mount
15 & 25 Gallon
(special order) |
Side Mount
15 & 25 Gallon
(stock items) |
Upright Mount
50 Gallon
(stock item)
|
Saddle
Mount
35 Gallon
(special order)
|
Saddle
Mount
50 Gallon
(stock item) |
Saddle
Mount
75
Gallon
(stock item)
|
|
|
Upright
Poly
55 Gallon
(stock item) |
|
A
wide variety of
reservoir capacity
choices available, from 7
gallons to 75 gallons.
All multi-ported to
accommodate suction,
and return line
options, and including
vented fill caps and
internal baffles.
|
|
Standard
Air Controls used for PTO and
Dump Pump valve (dash mount). |
|
Optional
Integrated
PTO & Hoist Control
& Consoles. |
 |
Many
choices of controls available, ranging
from the standard air controls
included with PTO and Dump Pump,
generally dash mounted, to integrated
air PTO/Hoist control heads and
varying height consoles, for cab floor
mounting.
Typical
PTO & Dump Pump 2-line
installation on bottom PTO opening
of Eaton/Fuller RT/RTO/RTLO/FRO &
Rockwell RM Transmission:
Power
Take-Off unit mounted on
bottom opening of
transmission. Dump Pump
directly mounted to PTO with
no driveline required.
Dump Pump to be supported by a
bracket (customer supplied)
between two transmission case
bolts and the extended studs
on the dump pump (see above).
A 2-line installation requires
only a suction line (pump port
marked "INLET") and
a pressure line (pump port
marked "CYL"). *On a
2-line system, the port marked
"RETURN" is to
remain plugged and not used.
A 3-line installation requires
the addition of a 3-line
sleeve (optional-extra)
inserted into the inlet port
hole, and a (third) return
line back to tank (pump port
marked "RETURN").
|
|
From an
individual component to your own
specified custom assembled system
kits, and anything in between, let the
experts at Am-Dyn-Ic Fluid Power Inc
help. Your satisfaction is our number
one goal. |
|
To
help us apply the correct components for
your
required system, click here to view or
print our
(click here) |
|
View
diagrams for popular Wetline kits by
clicking below:
|
|
|
|
|
