This High Pressure System utilizes a Commercial Intertech (Parker) hydraulic pump rated for the higher pressures required for many utility trailers in use today. The most common uses for this type system is to supply power to a lowboy or walking floor trailer system. The control valve for these type systems is equipped on the trailer, so a high pressure hydraulic oil supply is all that is required for operation.

Components:

A Chelsea (Parker) 8-bolt Air Operated Power Take-Off with a direct mount pump option.

A Commercial Intertech (Parker) hydraulic pump,  rated at from 12-20 GPM at 1200 rpm(dependent on particular trailer requirements), with a pressure rating up to 3000 psi continuous duty. Direct mounted to the PTO, it eliminates the need for a driveline.

A Parker Adjustable Inline Relief assy, to protect the hydraulic system on the tractor in case of accidental PTO engagement when not connected to a trailer.

A Parker Inline Return filter assembly with flow capacity of 20 gallons and a 10 micron element rating is recommended.

A Hydraulic Reservoir with a minimum capacity of 15 gallons is recommended. Reservoir should also have an integrated suction strainer and a return line port below the oil level, as well as an internal baffle.