This Two Line Dump System utilizes an integrated hydraulic pump and control valve. The most common use for this system is to power a dump/lead trailer. This system is recommended for intermittent duty, with PTO engaged for approximately five minutes or less, such as when an operator simply dumps the load and disengages PTO.

Components:

A Chelsea (Parker) 8-bolt Air Operated Power Take-Off with a direct mount pump option.

A Commercial Intertech (Parker) hydraulic Dump Pump, a pump and control valve integrated into one unit, rated at 30 GPM at 1200 rpm (6.38 C.I.R.), with a pressure rating up to 2000 psi continuous duty. Direct mounted to the PTO, it eliminates the need for a driveline. Air operated valve (manual available).

A Hydraulic Reservoir with a minimum capacity of 50 gallons is recommended Reservoir should also have an integrated suction strainer and a return line port below the oil level, as well as an internal baffle.